Geekworm X1011 PCIe to Quad M.2 Key-M NVMe SSD HAT Peripheral Board for Raspberry Pi 5 (M.2 2230/2242/2260/2280 SSD Supported)

About this item Compatibility: Pi 5 quad nvme hat only compatible with Raspberry Pi 5; Model: X1011; Supports booting from NVME SSDs starting with bootloader version 2024-05-17 and later versions; DO NOT SUPPORT RAID! Support FOUR M2 NVMe SSDs: Support quad M.2 KEY-M NVMe SSD 2230/2242/2260/2280 length installation. Comes with SSD copper pillar for 2230/2242/2260 SSD installation User Manual: Google Geekworm WiKi and search X1011 for hardware installation and software guide; About the issue [[186136.348546] nvme nvme1: controller is down; will reset: CSTS=0x3, PCI_STATUS=0x10], pls refer to X1011 WiKi to use the new and updated software guide. How to Power: Powering via both pogo pins and FFC or DC power jack, ensuring sufficient power supply; Don’t power the X1011 via DC powe jack and the Raspberry Pi5 via USB-C at the same time; Use PD 27W power adapter for Raspberry Pi 5 is OK Packing List: 1 x X1011 PCIe to M2 NVMe Shield, 2 x 37 mm PCIe FFC cable (one as backup), 1 x Screws Pack Matching Case X1011-C1: Refer to X1011-C1 metal case for Raspberry Pi 5 and X1011 installation The X1011 currently doesn’t support all RAID types, including RAID 1 and ZFS, likely due to driver compatibility issues. Product Description The X1011 currently does not support all RAID types, including RAID 1 and ZFS. This might be due to driver compatibility issues, which are yet to be confirmed and advised. The X1011 is a collection of four M.2 SSD drives recognized as separate drives by the OS. It uses the ASM1184e PCI express packet switch, with 1 PCIe x1 Gen2 upstream port to 4 PCIe x1 Gen2 downstream ports, enabling users to extend PCIe ports on a Raspberry Pi 5. Specifications Model X1011 Compatible With for Raspberry Pi 5 Mounting Position at the bottom of Raspberry Pi 5 PCIe Connector 1x 16-pin pitch 0.5mm SSD Connector 4x M.2 KEY-M 67P M.2 Key-M NVMe SSD Supported Quad 2230/2242/2260/2280 PCB Size 109 mm x 87.2 mm Power Supply 5Vdc +/-5% ≥5A power via FFC & pogo pins OR 5Vdc +/-5% ≥5A power via DC power jack Packing List 1 x X1011 V1.1 M.2 NVMe 4 SSD shield, 2 x 37mm PCIe FFC cable, 2 x M2.5×5 F/F Spacers, 2 x M2.5×5+5 M/F Spacers, 4 x M2x4mm Screws, 4 x M2 Copper Nut Note: The X1011 supports NVMe boot with the firmware EEPROM 2024/05/17 version and later versions. Do not support RAID!!! Don’t power the X1011 via DC powe jack and the Raspberry Pi5 via USB-C at the same time! Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices. Older NVMe drives with less efficient flash media may not perform as well as newer drives. New NVMe SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer. The Raspberry Pi 5 board, SSD, active cooler or power adapter is not included in the packing list. Overview The X1011 four M.2 NVMe SSD shield, designed to provide a mass-capacity storage and high-speed storage solution for your Raspberry Pi 5. Its sleek and compact design enables easy attachment of four full-size M.2 2280 SSDs to your Raspberry Pi 5. With its PCIe 2.0 interface, you can experience data transfer rates of up to 5Gbps, allowing you to effortlessly transfer large amounts of data within seconds. The X1011 is an ideal storage solution for creating a home media center or building a network-attached storage (NAS) system. It allows you to store and stream your own videos, music, and digital photos within your home or even remotely across the world. Features Model: X1011 Compatible with Raspberry Pi 5 ONLY Support FOUR M.2 Key-M NVMe SSDs Support M.2 NVMe SSD with 2280/2260/2242/2230 length PCB Size: 109mm x 87.2mm Provides speedy data transfer with PCIe 2.0 5Gbps Powering via both pogo pins & FFC or DC power jack, ensuring sufficient power supply without any worries Equipped with high-efficiency DC/DC step-down converter, delivering a maximum of 10A to power your SSDs Designed to be attached on bottom, allows using your favorite HATs alongside it Compatible with the HAT+ STANDBY power state, automatically turning off when the Pi 5 shuts down. Compatible with the official Raspberry Pi 5 active cooler or Argon THRML 30mm Active Cooler or third party cooler H505/H501 without affecting cooling performance How to Power 5Vdc +/-5% ≥5A power via FFC & pogo pins 5Vdc +/-5% ≥5A power via Type-C of Pi 5 or DC power jack of X1011 (Don’t power the X1011 via DC powe jack and the Raspberry Pi5 via USB-C at the same time.) Matching Case Refer to X1011-C1 metal case. Because it is a metal case, it will shield the WiFi signal, please use wired Ethernet. Product information Technical Details Collapse all Other Technical Details Brand ‎Geekworm Series ‎X1011 Item model number ‎X1011 Operating System ‎Linux Item Weight ‎1.8 ounces Package Dimensions ‎5.16 x 4.09 x 1.26 inches Color ‎black Manufacturer ‎Geekworm ASIN ‎B0D734CPVP Country of Origin ‎China Date First Available ‎June 14, 2024 Additional Information Customer Reviews 2.8 2.8 out of 5 stars 6 ratings 2.8 out of 5 stars Best Sellers Rank #1,142 in Single Board Computers (Computers & Accessories) Warranty & Support Amazon.com Return Policy:You may return any new computer purchased from Amazon.com that is “dead on arrival,” arrives in damaged condition, or is still in unopened boxes, for a full refund within 30 days of purchase. Amazon.com reserves the right to test “dead on arrival” returns and impose a customer fee equal to 15 percent of the product sales price if the customer misrepresents the condition of the product. Any returned computer that is damaged through customer misuse, is missing parts, or is in unsellable condition due to customer tampering will result in the customer being charged a higher restocking fee based on the condition of the product. Amazon.com will not accept returns of any desktop or notebook computer more than 30 days after you receive the shipment. New, used, and refurbished products purchased from Marketplace vendors are subject to the returns policy of the individual vendor. Product Warranty: For warranty information about this product, please click here Feedback Would you like to tell us about a lower price?