About this item Poles are not included with DIY Canopy Fittings Kits. The conduit poles must be purchased separately. The metal poles (EMT – Electrical Metallic Tubing) are sold in 10′ lengths at any major hardware store. A Cowboy Canopy 10′ x 20′ Slope Kit uses 17 EMT poles in size 1″. Slope, Lean-To Canopy Parts Kits can be used for many different purposes such as DIY carports for RV’s, boats, cars, jet skis and motorcycles. Livestock, horse and dog shelters. Shade shelters for outdoor dining, picnics and tailgating. Party tents for outdoor events, festivals, farmer’s markets, swap meets and flea markets. Greenhouses and sheds for outdoor workshops, storage and more. Cowboy Canopy uses only premium quality EMT Canopy Fittings. They are made of galvanized steel and are rust resistant. The eye bolts have 360-degree welds. These Fittings are built to last decades. All Fittings have eye bolts which simplify assembly. Simply use the eye bolts to hand tighten your poles to your Fittings. Unscrew to take down. Construct your DIY Canopy with no drills, screwdrivers or advanced skills in construction required. Slope Canopy Kits can be customized to a specific size to fit your needs. The slope angle is 102-degrees, which means there are 2.5″ of rise for every foot of run of your roof. Knowing this information allows you to modify your pole lengths. Kits are listed in 10′ increments because they are sold in 10′ poles. However, this can be changed. For example, a 10′ x 10′ kit can be custom fit to 8′ x 8′, or 6′ x 8′, etc. The Slope roof pitch (102 degrees) is NOT recommended for snow. The pitch is not steep enough to allow shedding of snow. Heavy snow loads resting on your Canopy’s roof may cause damage to your Canopy poles, Fittings and surrounding properties. If you live in an area that snows, use a High Peak Canopy instead. The High Peak roof pitch (120 degrees) will prevent excessive snow accumulation. Acts of Nature: Cowboy Canopy is not responsible for Canopies or property damaged due to acts of nature. This includes snow, rain, wind, floods, severe storms, or any other naturally occurring event. It is the customer’s responsibility to use discretion during periods of severe weather, and take the necessary steps to ensure damage is not caused to the canopy or surrounding property. Product Description DIY Custom Canopies Premium Quality – Securely welded joints, 360-degree welds around eye bolts, and thick 16-gauge steel. Durable – Rust resistant, galvanized steel finish. Simplicity – Eye bolts make assembly fast and easy with no tools required. Value – Build sturdy carports and shelters that are also affordable. Poles NOT Included Cowboy Canopy Fittings Kits do NOT include the canopy poles. The canopy poles must be purchased separately. EMT poles (Electrical Metallic Tubing) are sold in 10′ lengths at any major hardware store. This 10′ x 20′ Slope Fittings Kit uses 17 EMT conduit poles in size 1″ diameter. 10′ x 20′ Slope Roof Fittings FP3J A 10′ x 20′ Slope Kit includes 2 FP3J Fittings. FP3JSL A 10′ x 20′ Slope Kit includes 2 FP3JSL Fittings. FP41 A 10′ x 20′ Slope Kit includes 1 FP41 Fitting. FP41SL A 10′ x 20′ Slope Kit includes 1 FP41SL Fitting. Foot Pads and Side Wall Fittings Foot Pad A 10′ x 20′ Slope Kit includes 6 Foot Pads. FOL A 10′ x 20′ Slope Kit includes 4 FOL Side Wall Fittings. FOT A 10′ x 20′ Slope Kit includes 2 FOT Side Wall Fittings. 1″ EMT Fittings The inner diameter of a 1″ Canopy Fitting is 1.255″. 1″ Fittings pair with 1″ EMT conduit. 10′ x 20′ Slope Canopy Dimensions and Parts 6 Roof Fittings (FP3J, FP41, FP3JSL and FP41SL) 6 Side Wall Fittings (FOL and FOT) 6 Foot Pads IMPORTANT: Canopy Kits include the FITTINGS ONLY. The poles are NOT included. Canopy Poles (EMT – Electrical Metallic Tubing) can be purchased at any major hardware store. They are sold in 10′ lengths. This kit uses 1″ EMT. 17 EMT Poles are needed to build a 10′ x 20′ Slope Canopy. 10′ Poles – 14 8′ Poles – 3 (Cut 3 poles to 8′ lengths for the canopy’s shorter legs) Canopy Roof Size – 10′ x 20′ Canopy Footprint – 9.8’W x 20L’ Canopy Fitting Size – 1″ (1″ Fittings pair with 1″ EMT) Slope Angle – 102 degrees Measurements can be customized to fit your needs by adjusting the lengths of your poles. A slope roof has a 102-degree angle with 2.5″ of rise per foot of run. 20′ x 20′ A-Frame 10′ x 20′ Flat 10′ x 10′ Slope 10′ x 20′ Slope 10′ x 20′ Low Peak 10′ x 20′ High Peak Buying Options Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews — 5.0 out of 5 stars 1 3.9 out of 5 stars 4 4.5 out of 5 stars 20 4.2 out of 5 stars 5 5.0 out of 5 stars 1 Price — $189.99 $189 . 99 $134.99 $134 . 99 $189.99 $189 . 99 $219.99 $219 . 99 $289.99 $289 . 99 Roof Size 20′ x 20′ 10′ x 20′ 10′ x 10′ 10′ x 20′ 10′ x 20′ 10′ x 20′ Roof Style A-Frame (78 degrees) Flat (90 degrees) Slope (102 degrees) Slope (102 degrees) Low Peak (102 degrees) High Peak (102 degrees) Number of Fittings Included 9 Fittings 18 Fittings 12 Fittings 18 Fittings 21 Fittings 21 Fittings Number of Poles Required (Poles NOT Included) 12 Poles 17 Poles 10 Poles 17 Poles 19 Poles 19 Poles Fitting Size 1″ (1″ Fittings pair with 1″ EMT conduit) 1″ (1″ Fittings pair with 1″ EMT conduit) 1″ (1″ Fittings pair with 1″ EMT conduit) 1″ (1″ Fittings pair with 1″ EMT conduit) 1″ (1″ Fittings pair with 1″ EMT conduit) 1″ (1″ Fittings pair with 1″ EMT conduit) Product information Brand Cowboy Canopy Material Alloy Steel Color galvanized steel Recommended Uses For Product Outdoor Activities, Party, Festival, Picnic, Tailgate Party, Camping, Hiking, Trade Shows, Fishing, Backpacking, Canopies, Recreation, Vehicle Cover, Greenhouses, Outdoor Market Product Dimensions 20″L x 10″W x 10″H Frame Material Alloy Steel Water Resistance Level Water Resistant Pole Material Type Alloy Steel, Metal Global Trade Identification Number 00860009841413 Assembly Required Yes Manufacturer PTM ASIN B0BYWGXCSQ Country of Origin China Item model number slope 1020 Customer Reviews 4.5 4.5 out of 5 stars 20 ratings 4.5 out of 5 stars Best Sellers Rank #107,855 in Patio, Lawn & Garden (See Top 100 in Patio, Lawn & Garden) #137 in Carports Warranty & Support Product Warranty: For warranty information about this product, please click here Feedback Would you like to tell us about a lower price?
10′ x 20′ Slope, Lean-to Canopy Fittings Kits, DIY Metal Carport Frame Parts, 1″ EMT
$147.00
SKU: 697dcf7afc02
Category: Uncategorized
Related products
Uncategorized
$36.00
$30.00
$39.00
$52.00
Uncategorized
$36.00