About this item Jorkar USB C 3.2 SSD enclosure works for Mac SSDs with 12+16 Pins mid 2013-2017 MacBook Air/pro A1466 A1465 A1502 A1398 as list in description. Please check if your ssd is the one supported before order (important). SSD not included, just enclosure. NOT compatible with all SATA SSDs, or third-party SSDs. The SSD should be formatted first if you want to use it on Windows OS.On Windows OS, hard disk will not available on “This PC”/ “My computer”, please find your drive from “Disk Management”. Jorkar USB C 3.2 SSD enclosure Support up to 20Gbps transmission speed with USB 3.2 Gen2 interface if your SSD & the computer Both supports 20Gbps. Or just 10Gbps, 5Gbps according to your ssd and your computer. Jorkar 12+16 Pin SSD enclosure is sturdy and portable, with aluminum alloy case for quicker heat dissipation. To prevent it from being disconnected from your Mac or PC, we advise you to deselect “Put hard disks to sleep when possible” both in Battery and Power Adapter. Note that the screwdriver in the package is a little small and not very easy to use. It’s Philips 2.0. When using it, you need to align the interface, press it tightly with a little force and then rotate it. If it really doesn’t work, you can find out if there is a screwdriver with Philips 3.0 at home, which will work better. We will also change bigger screwdriver with Philips 3.0 later. Product Description Jorkar External SSD Enclosure for 12+16 Pin MacBook SSD USB C 3.2 with Indicator *Faster Data Transmission, Jorkar USB C 3.2 SSD enclosure Support up to 20Gbps transmission speed with USB 3.2 Gen2 interface if your SSD & the computer Both supports 20Gbps, Or just 10Gbps, 5Gbps according to your ssd and your computer. *When macbook ssd connected to a Thunder bolt 3 or USB 3.1 Gen 2 port, both the read and write speeds can reach up to 900 MB/s. *Compatible with a variety of operating systems, support for Windows 7/8/10 and for MacOS 10, 10.5 above operating systems. *DO NOT Support NVMe Protocol; DO NOT Support Mac SSD with Built-in Heat System; DO NOT Suport latest macOS Sonoma. Jorkar USB C 3.2 SSD enclosure works well for Mac SSDs with 12+16 Pins mid 2013-2017 as list in description. Please check if your ssd is the one supported before order (important). SSD not included, just enclosure. NOT compatible with all SATA SSDs, or third-party SSDs. Support size（Please read it before you purchase）: Only For iMac Intel 21.5″ A1418 Late 2013 to Mid 2014, iMac Intel 27″ A1419 Late 2013 to Late 2015. MacBook Air 13″ A1466 Mid 2013 to Early 2017, MacBook Pro 13″ Retina Display A1502 Late 2013 to Early 2015, MacBook Pro 15″ Retina Display A1398 Late 2013 to Mid 2015. If you aren’t sure if it is compatible with your SSD, please tell us for free. * Notice: It is compatible with MacOS, generally the hard drive will pop up on desktop. On Windows OS, hard disk will not available on “This PC” or “My computer”, please find your hard disk in “Disk Management”. The SSD should be formatted if you want to use on Windows. (Format will delete all your files) 1. Insert drive and connect the enclosure to PC. 2. Hard Disk Initialization: Computer—-Manage—Disk Management—find new disk and initialize (NOTE: Please choose MBR if the capacity of your disk is less than 2TB, choose GPT if larger than 2TB.) 3. Disk Partition and Format: New disk will become “Disk 1” after initialization, right click “Disk 1” and choose “New Simple Volume” to do partition, choose the capacity you need and choose “Formatting”. Please note that format will delete all your files, please back up your files before formatting. Attention: 1. Please make sure your SSD is from the following models: for MacBook Air / Pro Retina 2013 2014 2015 2017 built-in SSD (NOT for MacBook 2010 2011 2012 SSDs, and NVMe protocol SSDs are not applicable.) 2. The front USB interface of some Appl desktops and Appl notebooks have insufficient power supply (weak current), so some customers said that their PC can’t recognize the SSD, or are unstable, easy to disconnect, or prompt an error. In this case, please buy a docking station or a USB Hub to solve the problem. 3. Do not move the hard drive case during use, and prevent collision with the hard drive. Do not squeeze the product with external force. 4. Non-professionals should not disassemble the product or repair it. 5. When disconnecting this external hard drive, you should exit safely. If the hard drive data is accidentally lost, we are not responsible to restore any data. 6. For Mac OS PC, the hard drive should be formatted with exFAT. 7. Your internal SSD needs to be re-partitioned for normal storage and copying, otherwise it may appear unrecognizable. 8. If high transmission speed is required, please plug it into a computer equipped with USB3.0 interface. Overheating Protection: If your ssd overheating when transfer large of data, enclosure will run the overheating protection auto and change to read-only mode, otherwise stop transfering or down the speed to avoid your ssd damaged. Aluminum alloy shell: full of texture, excellent heat dissipation. Play&plug: Supports Windows, Mac system, strong compatibility, no need to drive. Support UASP with ultra fast transmission speed. Jorkar Portable SSD Enclosure, Easy Installation Just take out the PCB board from the enclosure, then fully insert SSD to card slot of the PCB board, then put PCB back into the enclosure and tighten the screws. Small size, easy installation, fast transmission and convenient to use. QA: Q: Why doesn’t the drive work after I installed it and followed the instructions? A: Please check as follows. 1, If the indicator light is off, please check if the enclosure and device is firmly connected or if the data cable is damaged. 2, If the indicator light is on, please check if it is recognized in the system information, if not, the SSD may be damaged. Q: Why is the MacBook SSD Enclosure very hot when it is running? A: This is a normal phenomenon, SSD will generate a lot of heat when transferring data at high speed, the aluminum housing will conduct heat more efficiently, please install the rear housing during use, this will improve the efficiency of heat dissipation. Q: Why does connecting other hard drives not work? A: This MacBook SSD Enclosure is only compatible with MacBook Pro,MacBook Air, Mac Pro, iMac from 2013 to 2017. other models of SSD are not readable, please make sure the hard drive model before use. If you are using SSD with M.2 interface, we provide M.2 adapter, please follow the adapter in advance and then install the hard drive. Q: Why does the connect suddenly break during the use of macbook ssd enclosure? A: 1, First make sure macbook ssd is installed properly, better tighten the screws to make sure it won’t be disconnected suddenly. 2, deselect “Put hard disks to sleep when possible” in both Battery and and Power Adapter. Product information Material Aluminum Item Weight 200 Grams Compatible Devices MacBook Air/Pro SSDs with 12+16 pins (specifically A1466, A1465, A1502, A1398) Max Number of Supported Devices 20 Data Transfer Rate 10 Gigabits Per Second Manufacturer Jorkar UPC 764143665075 Product Dimensions 4.21 x 1.77 x 0.79 inches Item Weight 7.1 ounces ASIN B0CWTXKZQY Item model number JK-MAC-RGB Customer Reviews 3.8 3.8 out of 5 stars 13 ratings 3.8 out of 5 stars Best Sellers Rank #939 in Internal Solid State Drives #7,776 in Computer Internal Components Date First Available March 1, 2024 Country of Origin China Warranty & Support Product Warranty: For warranty information about this product, please click here Feedback Would you like to tell us about a lower price?
Related products
Uncategorized
Uncategorized
Uncategorized
Uncategorized