About this item Further improved second generation of the iconic, award-winning NH-D15: Even better quiet cooling performance thanks to 8 heatpipes, 20% more surface area and novel NF-A14x25r G2 fans! Regular all-round version for optimal results on AMD AM5 using the included offset mounting as well as on Intel LGA1851 (and LGA1700 when using the included NM-ISW1 washers to reduce CPU warp), ideal for Ryzen 9 9950X, Core Ultra 285K, etc. Two state-of-the-art NF-A14x25r G2 140mm fans with speed-offset for acoustic fine-tuning, Low-Noise Adaptors and PWM for automatic speed control: maximum efficiency under load, near silent at idle! Offset design with recessed lower fins clears top PCIe x16 on most current motherboards and offers 59mm RAM clearance in single fan mode (32mm with both fans, see Noctua Compatibility Centre) Includes superior NT-H2 thermal paste and Torx-based SecuFirm2+ mounting system with NM-SD1 screwdriver for easy installation on AMD AM5 & AM4 as well as Intel LGA1851, LGA1700, LGA1200 & LGA115x Product Description The NH-D15 G2 is the further improved second generation of Noctua’s iconic NH-D15. With its state-of-the-art, speed-offset NF-A14x25r G2 PWM fans, eight heatpipes and asymmetrical fin-stacks that have been carefully fine-tuned to work in tandem with the new fans, it achieves even better quiet cooling performance than its award-winning predecessor. As such, the G2 version is a true flagship model that continues the legacy of the original NH-D15 by pushing the boundaries of air cooling and rivalling the efficiency of many all-in-one (AIO) water cooling solutions. In addition to its further improved performance, the NH-D15 G2 also offers enhanced compatibility thanks to an offset construction that allows it to clear the top PCIe x16 slot on most current motherboards. Last but not least, the G2 version has been upgraded to the Torx-based SecuFirm2+ multi-socket mounting system with included NM-SD1 screwdriver as well as to Noctua’s superior NT-H2 thermal compound. In short, the NH-D15 G2 has been further refined in virtually all respects from the heatsink and the fans all the way down to the mounting, thermal paste and accessory package, making it an ideal choice for customers who demand the best of the best in air cooling. More performance, smaller size Thanks to the higher fin density made possible by the new NF-A14x25r G2 fans as well as the asymmetrical fin-stacks and a slightly smaller gap between the stacks, the G2 version combines improved performance with a slightly smaller size compared to the original NH-D15 (9mm less heatsink depth, same heatsink width, same total height including fans). 8 heatpipes for superior performance at higher heat-loads The NH-D15 G2 utilises eight instead of six heatpipes compared to the original NH-D15. The increased thermal capacity of the extra heatpipes is especially helpful at extreme heat-loads such as 250W and beyond, where the performance boost over the original NH-D15 is the biggest. Two NF-A14x25r G2 fans Noctua’s next-generation NF-A14x25r G2 fans set a new benchmark for performance-to-noise efficiency in round-frame 140mm fans. Their superb acoustics as well as their superior airflow and pressure characteristics are one of the cornerstones that enable the NH-D15 G2 to push beyond its legendary predecessor. NT-H2 next-gen thermal compound For customers who want the best of the best in air cooling, every degree counts. This is why the NH-D15 G2 includes a tube of Noctua’s next-generation NT-H2 thermal compound that provides even better performance than the award-winning NT-H1, allowing to achieve the best possible cooling results. Measurements Height (without fan): 168 mm Width (without fan): 150 mm Depth (without fan): 127 mm Height (with fan): 168 mm Width (with fan): 150 mm Depth (with fan): 152 mm Weight (without fan): 1180 g Weight (with fan/s): 1525 g Materials Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating Cooler Specifications Scope of delivery 2x NF-A14x25r G2 PWM premium fan 2x NA-RC14 Low-Noise Adaptor (L.N.A.) NA-YC1 4-pin PWM splitter cable NT-H2 high-grade thermal compound NA-TPG1 thermal paste guard for AM5 NA-CW1 cleaning wipe SecuFirm2+ multi-socket mounting system 4x NM-ISW1 washers for LGA1700 NM-SD1 Torx T20 screwdriver Noctua metal case-badge Next-generation performance For an entire decade, the original NH-D15 was widely regarded as the best air cooler on the market. The G2 version continues this legacy by further improving the renowned quiet cooling performance of its iconic predecessor. NH-D15 G2 NH-D15 G2 HBC NH-D15 G2 LBC NH-D15 NH-D15 chromax.black Add to Cart Add to Cart Add to Cart Add to Cart Add to Cart Customer Reviews 4.6 out of 5 stars 70 4.5 out of 5 stars 21 4.7 out of 5 stars 69 4.8 out of 5 stars 11,125 4.8 out of 5 stars 12,981 Price $149.95 $149 . 95 $149.95 $149 . 95 $149.95 $149 . 95 $109.95 $109 . 95 $119.95 $119 . 95 LGA1851, LGA1700 ✓ ✓ Compatible but not recommended ✓ ✓ LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) ✓ ✓ Compatible but not recommended ✓ ✓ LGA20xx Square ILM with NM-i20xx with NM-i20xx with NM-i20xx with NM-i20xx with NM-i20xx LGA20xx Narrow ILM X X X X X LGA4189 X X X X X LGA4677 X X X X X AM5 ✓ Compatible but not recommended ✓ ✓ ✓ AM4 ✓ Compatible but not recommended ✓ ✓ ✓ TR4, SP3, sTRX4, sWRX8 X X X X X sTR5, SP6 X X X X X
Related products
Uncategorized
Uncategorized
Uncategorized
